Archive for the ‘Sourcing Strategy’ Category

Managing Tail Spend

Wednesday, June 24th, 2020

 

 

Today’s post is by Dave Wenig, Senior Vice President of Sales and Services at SafeSourcing.

Along the same lines as my recent post about Procurement as a Service (PaaS), I thought I would focus on tail spend. Here again, the concept of managing tail spend isn’t new, but it has also been receiving more attention recently. I would argue tail spend is finally getting the attention it deserves.

I’ve often thought that tail spend is undervalued. I suspect the term tail spend gives the impression that the spend in the tail is insignificant. The reality is that the tail can be awfully long and represents a much larger percentage of overall spend than one might think.

To me, the ability to manage tail spend is essential. SafeSourcing’s approach to tail spend management starts with our SafeSpendAnalysis™ service to identify the categories and subcategories in which the spend can be found. Until you have gone through this process, it is easy to underestimate just how much purchasing is taking place on an annual basis that should be considered the tail. One-off purchases, rogue purchasing, and categories with many vendors providing the same thing are just a few of the common culprits. It’s all too easy for this type of spend to fly under the radar when an organization lacks a proper procurement policy and the ability to proactively manage against that policy.

Again, to SafeSourcing, the concept of managing this type of spend is nothing new. With our SaaS model and our tools and capabilities, we have been targeting tail spend for management and cost reduction since we started. Where others have marketing around this tail spend management, SafeSourcing has experience.

It’s really great to see the recent interest in tail spend and in controlling costs in general. Expense management is so critically important right now. The best strategy a company can have is one that considered their entire spend to be within the scope of their expense management initiatives and that includes the tail.

If you would like more information on how SafeSourcing can help you, please contact a SafeSourcing Customer Service representative.  We have an entire team ready to assist you today.

 

 

 

 

 

Bags and Boxes and Bailers Oh My!

Friday, June 12th, 2020

 

How best to manage a plastic bag and cardboard box baling program with only one baler at a store.

Today’s post is from our archives at  SafeSourcing.

The first approach is the program that numerous large retail chains have adopted, which is known as creating “sandwich bales”. These bales are compiled of both cardboard and plastic.  Workers place 10 to 20 inches of cardboard into the baler first, then shrink wrap and plastic bags are loaded in, and another section of cardboard is placed on top.  The baler then presses the bale into a “sandwich” with 9 to 18 inches of recyclables plastic in the middle.  However, in the recycling world, when fiber and plastic are together as one, this is considered contamination.  Therefore, the bales must be picked up, taken to a local recycling center and broken apart and separated.  Then, the plastic is baled together and the cardboard is baled together.  At this point, these items can be effectively sold.

The second approach is where the store has enough space to stage the plastic bags until there is enough to complete a full bale. This requires the backroom of the retailer to be large enough to store 400-600 lbs. plastic.

For more information on how we can help you with your procurement needs or on our “Risk Free” trial program, please contact a SafeSourcing Customer Service Representative. We have an entire customer services team waiting to assist you today.

We look forward to your comments.

 

What Packaging Program is Best for Your Company?

Wednesday, June 10th, 2020

 

Today’s post has is from our archives at  SafeSourcing.

When it comes to packaging supplies, companies have multiple options for managing their inventory. Below you will see the different options and what each model entails.

Vendor Managed Inventory (VMI) – Vendor optimizes your company’s inventory by observing usage, floor stock and lead-time to define what model (dynamic historical model, min-max model, input forecasted model or combination of all three) will work best for your company. The vendor may also beresponsible for inventorying your packaging requirements and warehousing it.

Just in Time (JIT) – This program is designed for company’s who require numerous transactions on a regular basis and make best use of available floor space. The vendor conducts a detailed examination of the company’s packaging needs to create a solution that is custom.

Contract Packaging and Fulfillment – This program allows the customer to focus on their core competency by placing the full packaging function in the hands of packaging experts. Contract packaging creates fixed item costs for packaging regardless of production volume.

By utilizing any of the three types of programs, companies gain the following advantages.

  1. Freed up cash flow
  2. Maximized workspace for other core capabilities.

For more information on how we can help you with your packaging needs or on our “Risk Free” trial program, please contact a SafeSourcing Customer Service Representative. We have an entire customer services team waiting to assist you today.

We look forward to your comments.

 

 

 

 

 

Do you Know the Benefits of the New Wi-Fi 6?

Friday, May 8th, 2020

 

Today’s post is by Troy Lowe; Vice President of Development at SafeSourcing.

The Federal Communications Commission unanimously voted to adopt a proposal that will open up the 6GHz band for unlicensed Wi-Fi use. By doing this it will free up more than 1,200MHz for additional bandwidth for the next generation Wi-Fi 6 devices that are out and others that should be coming out later this year. One of the benefits of the new technology is better high density performance. Everywhere you go there is usually Wi-Fi available at places like college campuses, hospitals, restaurants and coffee shops. Because of the availability, there are usually a large number of users which puts a huge strain on the networks which aren’t usually setup for such high traffic. This high volume of users usually results in poor connectivity and slower network traffic.   The Wi-Fi 6 standard is designed to improve this latency with better high density performance. The access points are designed to help prevent the interference between network devices and transmit the data more efficiently. Below are some other benefits of the new Wi-Fi 6.

  • Faster Transfer speeds
  • Longer Device Battery Life
  • Powerful Coverage
  • Expanded Range
  • Better Connectivity

If you are looking to purchase new Wi-Fi equipment or devices and would like help researching available options, feel free to contact SafeSourcing.   We can gather all the necessary information for you and help you decide which one meets your needs. If you would like more information on how SafeSourcing can help you, please contact a SafeSourcing Customer Service representative.  We have an entire team ready to assist you today.

 

Ready to Serve

Thursday, April 23rd, 2020

 

 

Today’s post is written by Ivy Ray, Senior Procurement Specialist at SafeSourcing Inc.

During this time of crisis with COVID-19 there has been a lot of much deserved praise pouring out to the doctors, nurses, and first responders on the front lines making the sacrifice to care for people. There are many others who have also been enduring the dangers and going out every day to make sure that residents and organizations are receiving uninterrupted services…mail carriers, truckers, restauranteurs, and other essential personnel.

There are so many others who have been reaching out to answer the call to make things better for individuals and businesses in need. We have had suppliers reaching out to offer services and products to help in any way they can to provide continuity in services and to deliver products to those in need. From cleaning services and telecommunications services, to single serving food products and disposable products, companies are telling us that they are open for business and ready to provide whatever is necessary to help out.

We all want to get back to normal, or the “new normal” which will be on the other side of this, but for the folks who are still out there fighting the fight and bridging the gap, the show must go on. Immediate needs still have to be met as well as the things that keep this country going, so that when we do resume normal operations there is as much as a seamless transition as possible.

You may need to stock the shelves, or obtain a reliable cleaning service. Here at SafeSourcing, we are open and here when you need us. Even though we cannot visit with most customers face to face we are available on the phone, and through email. Our customer service team is here for any questions you have during this time.

For more information on how SafeSourcing can assist you in exploring your procurement solutions for your business efforts, or on our Risk Free trial program, please contact a SafeSourcing Customer Service Representative. We have an entire team ready to assist you today.

We look forward to your comments.

 

 

 

Don’t Wait because of COVID-19! Source Your Supply Items Now!

Monday, April 20th, 2020

 

Today’s post is by Dave Wenig, Senior Vice President of Sales and Services at SafeSourcing.

With all of the increasingly negative information out there about the COVID-19 pandemic we’re facing, I thought it would be a nice change of pace to share some information that is a bit more positive. Actually, today I’m writing about something that hasn’t changed during these difficult times.

On my LinkedIn page, I often post about recent successes we deliver for our customers. I share about a variety of different categories as we work with our customers to source just about everything they need whether products or services. For example, I’ve posted about reducing charges for consulting services by 22% and 36% on water heaters.

Those posts can be interesting on their own, but what I’ve noticed recently is even more so. I’ve noticed a trend. While that might not seem so interesting, I’ve come to realize that in today’s world this particular trend is something special. What I’ve noticed is that while we’re all facing so much uncertainty and challenge, the results we’re driving in terms of savings percentage for our customers remains unchanged. Specifically, I’ve been keeping an eye on a common set of categories that nearly all of our customers source with SafeSourcing.

Supplies are traditionally a strong set of categories for SafeSourcing and its customers. The savings we drive here are relatively easy to achieve. Recently, I’ve been keeping a close watch on these categories and am happy to report that the discounts we’re delivering on these categories are as deep as they ever are. Regardless of their point of origin, supply items savings are especially strong. While COVID-19 has been causing so much trouble and pain, we’ve still found about 25% savings on plastic cutlery, 26% savings on water filters, 24% savings on reusable bags, and more. That means the average savings at around 25% is still exactly where we would expect it to be. Some categories even seem to be generating a bit higher savings where the markets pricing and/or demand are down as well.

That’s some great news and is as close to certainty as we’re likely to get in the midst of this pandemic. Rather than feel helpless, take this as the opportunity that it is and take action to lock in your savings now. We may as well focus on challenges that are easily within our control.

Stay safe and don’t be shy if you need assistance. We’re all in this together. If you would like more information on how SafeSourcing can help you, please contact a SafeSourcing Customer Service representative.  We have an entire team ready to assist you today.

 

 

 

Optimism and Procurement

Friday, April 17th, 2020

 

 

Today’s blog is by Margaret Stewart, Director of HR and Administration at SafeSourcing.

With so much going on right now, many people are scared or concerned with what will happen and what things will be like when this is all over. While we may not yet know what, if anything will change, there are some areas that have already been affected. In fact, there is at least one particular area that has actually improved.

Many years ago, it wasn’t uncommon for a family to only own one car or even no cars. Now, that has changed a lot. Many Americans each have their own car and it has been a necessity for people to get where they need to, whether it is work, school, or shopping. With the current virus situation people are no longer driving to work as often and most schools are closed. This has greatly reduced the number of vehicles on the road.

There are a few silver linings here. With fewer people driving, there have been fewer accidents. This means there are less people being injured or dying in vehicle accidents. Because there are fewer accidents, insurance companies haven’t had to pay out as much money for repairs and medical expenses. In fact, there have been several car insurance companies that have begun refunding premiums because they have paid out so much less.

With fewer drivers on the road, another silver lining is less traffic and this can greatly help truck drivers and other aspects of logistics. Fewer cars mean more room for truck drivers, fewer distractions, and again, fewer accidents that can cause delays. This can mean transportation of goods is quicker and more efficient.

Another silver lining is a decrease in pollution. With fewer cars, there are fewer emissions from exhaust. In addition, truck drivers’ ability to drive with fewer delays, means they are also emitting less. Even more than the reduction of exhaust fumes, with fewer vehicles, there is fast less gas and diesel consumption. This means production can slow down, which can additionally help reduce pollution.

While we wait to get through this and for life to return to normal, we can know that there have been some silver linings to this dark cloud of a virus.

For more information on how SafeSourcing can help your supply chain of sourcing needs, or on our Risk Free trial program, please contact a SafeSourcing Customer Service representative. We have an entire team ready to assist you today.

 

REMINDER! CIO Applications Magazine Honors SafeSourcing

Friday, March 13th, 2020

 

SafeSourcing Inc., a leading eProcurement company offering a complete Procure to Pay suite of applications, has been recognized as one of the World‘s top auction application companies by CIO magazine.

CIO magazine has listed SafeSourcing, Inc. as one of the top ten auction platforms in its recent magazine edition. The article recognizes SafeSourcing as being a one-stop e-procurement and sourcing center, striking a balance of quality, affordability, product, and service.

“A strategic sourcing firm, SafeSourcing is at the forefront of offering a full suite of procure-to-pay tools under the SafeSourceIt™ banner which helps in reducing costs and improving efficiency” ~CIO magazine

CIO sat down with SafeSourcing CEO, Ronald D. Southard, to discuss the company’s value proposition, solutions, customer base, and future plans. In addition, the featured article elaborates on how SafeSourcing plays a role in e-procurement and how it accelerates efficiency and innovation.

SafeSourcing, Inc. provides cost effective tools under the SafeSourceIt™ product family that allows companies to dramatically reduce cost of goods, capital spending, and expenses in a timely manner while also reinforcing environmental and product safety programs. Focus is placed on a company’s entire spend for all products and services.

SafeSourcing’s early stage client engagement is specifically focused on cost reduction through the use of a white glove service based  on a detailed six step process using the SafeSourceIt™ e-RFX application suite.

Please visit www.safesourcing.com in order to  learn more.

 

Looking Back Helps you look forward

Monday, March 9th, 2020

 

Today’s post is from our  SafeSourcing Archives.

I believe it’s important to take a look in the rear-view mirror once in a while. To evaluate where you started, what it took to get further, your method for navigating, or things you wished you had done differently. Over the course of 6 years at Safe-Sourcing I have learned a lot, and think it’s worth sharing what I want to keep doing in the form of professional habits. However, the most valuable lessons might be just identifying how I want to grow, and what I want to do better:

Professional Habits:

Taking notes: Just do it. Maybe you want to appear as though you didn’t need to be told something to do it, or you just don’t like writing things down. Researchers have determined that we only retain about 11% of what we read or hear on average, and that isn’t nearly enough when you are having a fairly detailed conversation upon which the success or failure of your project may be determined. So do yourself a favor: Take notes for everything, and save them in a format that works best with your workflow (Laptop document, email, cellphone app, hand written, etc.) and check them off as you implement them.

Correlation: In procurement and inventory control, this means having unique identifiers that link 2 or more variables together. For example, how would your GPS app navigate you to the right location if there were multiple buildings with the exact same address in your city? A lot of people would get to the wrong place. Unique identifiers are a lot like addresses; they lead to a unique product or spec, so that there is no room for ambiguity in identifying exactly what you are looking for. Committing to a specification of a product because it “looks like” the specification of another is relying on luck to get the right product to fit your needs, and it will eventually end up biting you. Relying on exact matching of unique identifiers will make sure that what you want, and what you get, end up being the same thing.

Changing/Adapting: This requires a consistent willingness to reinvent one’s-self, and the humility to assume we always have new things we can learn. Sometimes this means taking notes, implementing a new policy off of those notes, and changing the way we do something going forward without having to check that its getting done right. This could also mean not adhering to static job descriptions and titles, so that when we see a need arise, we find a solution and create a path forward regardless of if the waters have been charted yet or not.

Things I want to do better:

Training “Sessions” vs ad-hoc feedback: Not everyone can turn on a dime, especially when they’re deep in the weeds. How would you find a dime in weeds anyway?? When I’ve seen new policies not get implemented quickly enough with my team (or even myself), I know it’s because I need to undo/redirect old habits. Every day we come across opportunities for improvement, but sometimes that opportunity is buried in an email from your boss 23 emails down a chain of long emails. A more formal training session has worked much better in many cases I’ve seen, and is something I would like to use in the future to develop my teams.

Reward, and provide opportunities to practice: Related to training, I really do think practice is necessary to change a previously habitualized work policy. It can be as simple as having the team do mock phone calls, draft document templates, or create faux financial calculations. But actually going through the motions of a new procedure helps re-wire the muscle memory, and memory ques, that people often need to happen in order to change habits. Furthermore, in highly dynamic businesses, I need to reward and recognize those that put forth the effort to adapt and learn quickly. The better my team is at this, the easier it makes my life as well.

Pass along the method, not just the order: Perhaps my biggest takeaway from looking back is that I want to empower my team to make the right decisions, not just teach them to take orders. This means I need to take more time to sit down with a team member, and review how to approach and analyze a problem. I would focus more on how to arrive at a conclusion, rather than just praise or criticize the result. This would be the counterpoint to the old-school means of changing activities by beating policy into the heads of employees. Policies are informed by objectives, and without understanding how to strategize to achieve those objectives, following policy will manifest as filling orders even when it doesn’t make sense to.

Likewise I need to ask well-worded questions to illicit a breakdown of how my mangers think about problems as learning opportunities for myself. I want to take a first-principles approach to both learning how and teaching how-to problem solve. As mentioned above, I believe humility is going to be a key ingredient to enacting this self-managing policy. However, I believe a lot of managers have an aversion to humility because it seems like such an antithesis to authority. I read an article recently by Dan Cable that I think summed up nicely why this is not the case:

“Humility and servant leadership do not imply that leaders have low self-esteem, or take on an attitude of servility. Instead, servant leadership emphasizes that the responsibility of a leader is to increase the ownership, autonomy, and responsibility of followers — to encourage them to think for themselves and try out their own ideas.”

Please leave a comment or for more information on how SafeSourcing can assist your team with your procurement process or on our “Risk Free” trial program, please contact a SafeSourcing Customer Service Representative. We have an entire customer services team waiting to assist you today.

Ambiguity is the enemy

Friday, March 6th, 2020

Today’s post is  from our archives at SafeSourcing.

Have you ever misinterpreted the meaning of someone’s written communication?

Of course you have, it happens to everyone. Why? Because it’s easy to make statements that contain multiple possible meanings. A large portion of the understanding we glean through verbal communication comes from body language, and word emphasis.

Take the following for example. We all hear written communication through whatever internal voicing’s we give the speaker. If I INTERPERATE the emphases of a word *denoted by asterisks* it completely changes the meaning of the phrase (the implied meaning in parentheses):

*I* don’t think he’s a liar (But somebody does)
I don’t *think* he’s a liar (But he could be)
I don’t think he’s a *liar* (But he’s probably something else equally terrible)
I *don’t* think he’s a liar (He’s definitely not a liar)

One way of testing the effectiveness of your communication is to ask yourself; How many different meanings could be extrapolated from my statement? Ideally your communication is so concise and exclusive to your meaning there’s only one possible interpretation. The same principle holds true for QUESTIONS; They should be formatted in such a way that they funnel all of the potential answers in the format that you are actually trying to receive back. Vague questions will receive vague answers.

Our RFI/RFP toolset, for instance, allows us to frame questions with as many constraints as necessary to receive answers with a high degree of relevance and usability. Not only do we format our wording to convey our meaning properly, we can force answers to be as close ended as a simple a Yes/No button, or as open ended as an essay answer.

Ask us how we can help your business ask the right questions, and narrow the possible meanings of your communications before you hit the send button!

We look forward to your comments.